Cadillac 2013 Escalade ESV, Инструкция пользователя M

Страница: 60 / 400

Black plate (14,1)
Cadillac Escalade (Europe) Owner Manual - 2013 - CRC - 6/20/12
3-14 Seats and Restraints
4. Release the seat from the
tumbled position by lifting lever
"2" next to the carrying handle at
the bottom rear of the seat.
5. Pull the seat down until it latches
to the floor. The seatback cannot
be raised to the upright position
unless the seat is latched to the
floor.
6. Pull up on the seatback until it
locks into the upright position.
7. Make sure the head restraint is
installed on the seatback and
adjusted properly before driving.
See
Head Restraints on
page 3 ‑ 2 for more information.
{
WARNING
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
8. Push and pull on the backrest to
make sure it is locked.
Removing the Third Row Seat
To remove the seat:
1. Open the tailgate to access the
controls for the seat.
2. Fold the seatbacks forward
using lever "1" and the
instructions listed previously
under "Folding the Seatbacks."
The seat cannot be unlatched
from the floor unless the
seatback is folded.
3. Unlatch the seat from the floor
by pulling the handle at the rear
of the seat "3 Removal Only"
toward the rear of the vehicle.
4. Roll the seat out of the vehicle.
There is a track in the floor to
guide the seat wheels out of the
vehicle.
Installing the Third Row Seat
To install the seat:
1. Open the tailgate to access the
rear of the vehicle.
2. Slide the front outboard seat
wheels into the track on the floor
and roll the seat forward. The
front latches should lock into
place. If the latches do not lock,
try tilting the rear of the seat
upward slightly.
3. Lower the rear of the seat and
push down on the seat to
engage the rear floor latches.