Black plate (51,1)
Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 8/
14/12
Vehicle Care
10-51
A Tire and Loading Information label
shows the size of the original
equipment tires and the correct
inflation pressure for the tires when
they are cold. See
Vehicle Load
Limits on page 9
‑
15
, for an example
of the Tire and Loading Information
label and its location. Also see
Tire
Pressure on page 10
‑
47
.
The TPMS can warn about a low
tire pressure condition but it does
not replace normal tire
maintenance. See
Tire Inspection
on page 10
‑
53
,
Tire Rotation on
page 10
‑
53
and
Tires on
page 10
‑
40
.
Notice:
Tire sealant materials are
not all the same. A non-approved
tire sealant could damage the
TPMS sensors. TPMS sensor
damage caused by using an
incorrect tire sealant is not
covered by the vehicle warranty.
Always use only the
GM-approved tire sealant
available through your dealer or
included in the vehicle.
Factory-installed Tire Inflator Kits
use a GM approved liquid tire
sealant. Using non-approved tire
sealants could damage the TPMS
sensors. See
Tire Sealant and
Compressor Kit on page 10
‑
62
for
information regarding the inflator kit
materials and instructions.
TPMS Malfunction Light and
Message
The TPMS will not function properly
if one or more of the TPMS sensors
are missing or inoperable. When the
system detects a malfunction, the
low tire warning light flashes for
about one minute and then stays on
for the remainder of the ignition
cycle. A DIC warning message also
displays. The malfunction light and
DIC warning message come on at
each ignition cycle until the problem
is corrected. Some of the conditions
that can cause these to come
on are:
.
One of the road tires has been
replaced with the spare tire. The
spare tire does not have a
TPMS sensor. The malfunction
light and DIC message should
go off after the road tire is
replaced and the sensor
matching process is performed
successfully. See "TPMS Sensor
Matching Process" later in this
section.
.
The TPMS sensor matching
process was not done or not
completed successfully after
rotating the tires. The
malfunction light and the DIC
message should go off after
successfully completing the
sensor matching process. See
"TPMS Sensor Matching
Process" later in this section.
.
One or more TPMS sensors are
missing or damaged. The
malfunction light and the DIC
message should go off when the
TPMS sensors are installed and
the sensor matching process is
performed successfully. See
your dealer for service.
Содержание 2013 Escalade ESV
Страница 396: ...Black plate 34 1 Cadillac Escalade Escalade ESV Owner Manual 2013 CRC 2nd Edition 8 14 12 10 34 Vehicle Care...
Страница 466: ...Black plate 6 1 Cadillac Escalade Escalade ESV Owner Manual 2013 CRC 2nd Edition 8 14 12 11 6 Service and Maintenance...
Страница 468: ...Black plate 8 1 Cadillac Escalade Escalade ESV Owner Manual 2013 CRC 2nd Edition 8 14 12 11 8 Service and Maintenance...
Страница 524: ...Black plate 14 1 Cadillac Escalade Escalade ESV Owner Manual 2013 CRC 2nd Edition 8 14 12 i 14 INDEX 2 NOTES...