Cadillac 2013 CUE, Руководство пользователя

Страница: 77 / 107

Cadillac CUE Infotainment System (GMNA-Localizing-Europe-9367711) -
2016 - CRC - 6/15/15
76 Voice Recognition
If a selection is made using a
manual control, the dialogue will
progress in the same way as if the
selection was made through a voice
command. Once the system is able
to complete the task, or the session
is terminated, the voice recognition
dialogue stops.
An example of this type of manual
intervention is touching on an entry
of a displayed number list instead of
speaking the number associated
with the entry desired.
Cancelling Voice Recognition
.
Touch the Home screen button.
Touching this button will
terminate the voice recognition
session.
.
Touch or say “ Cancel ” or “ Exit ”
to terminate the voice
recognition session and display
the screen from which voice
recognition was initiated.
.
Press
i
on the steering wheel
controls to terminate the voice
session and display the screen
from which voice recognition
was initiated.
Most languages do not support
natural language commands in
sentence form. For those
languages, use direct commands
like the examples shown on the
display.
Helpful Hints for Speaking
Commands
Voice recognition can understand
commands that are either naturally
stated in sentence form or direct
commands that state the application
and the task.
For best results:
.
Listen for the prompt and wait
for the beep before saying a
command or reply.
.
Say “ Help ” or look at the screen
display for example commands.
.
Voice recognition system prompt
can be interrupted while it is
playing by pressing
g
again.
For example, if the prompt
seems to be taking too long to
finish, to speak the command
without waiting for the prompt to
complete, press
g
again and
wait for the beep.
.
Speak the command naturally,
not too fast, not too slow. Use
direct commands without a lot of
extra words.
.
Usually Phone and Audio
commands can be spoken in a
single command.
For example, “ Call Dave Smith
at work, ” “ Play ” followed by the
artist or song name, or “ Tune ”
followed by the radio station
number.
.
Navigation destinations are too
complex for a single command.
First, state a command that
explains the type of destination
needed, such as I want
directions to an
“ Address, ”
“ Navigate to an intersection," ” I
need to find a Place of Interest
or POI,
” or “ Directions to a
Contact. ” The system responds
by requesting more details. After
saying
“ Place of Interest, ” only
major chains are available by
name. Chains are businesses