Cadillac 2011 SRX CROSSOVER, Руководство пользователя

Страница: 63 / 416

Black plate (7,1)
Cadillac SRX Owner Manual - 2013 - 1st crc - 7/2/12
Seats and Restraints 3-7
The vehicle will also automatically
save driver seat, outside mirror, and
adjustable throttle and brake pedal
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
turned off. These automatically
stored positions are referred to as
RKE Memory positions. See
Remote Keyless Entry (RKE)
System Operation on page 2
‑ 3 .
Storing Button Memory Positions
To save positions into Button
Memory for the
“ 1 ” and “ 2 ” driving
positions:
1. Adjust the driver seat, seatback
recliner, both outside mirrors,
and adjustable pedals,
if available, to the desired driving
positions.
2. Press and hold MEM (Memory)
and “ 1 ” at the same time until a
beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using “ 2. ”
Recalling Button Memory
Positions
Press and hold “ 1 ” or “ 2 ” to recall the
manually saved Button Memory
positions. Releasing
“ 1 ” or “ 2 ” before
the stored positions are reached
stops the recall.
If the ignition is in ON/RUN/START
and the vehicle is parked, briefly
press and release
“ 1 ” or “ 2 ” to recall
the Button Memory positions.
Placing the ignition in OFF or
moving the shift lever out of P (Park)
before the stored positions are
reached stops the recall.
If something has blocked the driver
seat and/or the adjustable pedals,
if available, while recalling a
memory position, the recall may
stop. Remove the obstruction; then
press and hold the appropriate
manual control for the memory item
that is not recalling for two seconds.
Try recalling the memory position
again by pressing the appropriate
memory button. If the memory
position is still not recalling, see
your dealer for service.
Storing RKE Memory Positions
Every time the ignition is placed in
OFF, the positions of the driver seat,
outside mirrors, and adjustable
pedals, if available, are
automatically stored to the RKE
transmitter used to start the vehicle.
These positions are called RKE
Memory positions and may be
different than the previously
mentioned Button Memory positions
saved to the
“ 1 ” or “ 2 ” buttons.
Recalling RKE Memory Positions
(Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the previously stored RKE Memory
positions for the current driver when
entering the vehicle.