Cadillac 2010 STS, Руководство пользователя

Страница: 433 / 536

A rear blowout, particularly on a curve, acts much like a
skid and may require the same correction you would
use in a skid. In any rear blowout, remove your foot
from the accelerator pedal. Get the vehicle under
control by steering the way you want the vehicle to go.
It may be very bumpy and noisy, but you can still steer.
Gently brake to a stop, well off the road if possible.
If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place and stopping.
1. Turn on the hazard warning flashers. See Hazard
Warning Flashers on page 4 ‑ 3 .
2. Park the vehicle. Set the parking brake firmly and
put the shift lever in P (Park).
3. Turn off the engine.
4. Inspect the flat tire.
{
WARNING:
Lifting a vehicle and getting under it to do
maintenance or repairs is dangerous without the
appropriate safety equipment and training. If a
jack is provided with the vehicle, it is designed
only for changing a flat tire. If it is used for
anything else, you or others could be badly
injured or killed if the vehicle slips off the jack. If a
jack is provided with the vehicle, only use it for
changing a flat tire.
This vehicle may come with a jack and spare tire or a
tire sealant and compressor kit. To use the jack and
spare tire, see
Changing a Flat Tire on page 6 ‑ 96 .
To use the tire sealant and compressor kit, see Tire
Sealant and Compressor Kit (Without Selector Switch)
on page 6
‑ 78 or Tire Sealant and Compressor Kit (With
Selector Switch) on page 6 ‑ 87 .
6-77
Ofrecido por www.electromanuales.com