Cadillac 2010 STS, Руководство пользователя

Страница: 300 / 536

Using the Re ‐ dial Command
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. After the tone, say “ Re ‐ dial ” . The system responds
with “ Re ‐ dial using <phone name> ” and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press
b g
and begin speaking to answer the call.
Call Waiting
Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
. Press
b g
to answer an incoming call when
another call is active. The original call is placed
on hold.
. Press
b g
again to return to the original call.
. To ignore the incoming call, continue with the
original call with no action.
Three ‐ Way Calling
Three ‐ Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press
b g
. The system responds
with “ Ready ” followed by a tone.
2. Say “ Three ‐ way call ” . The system responds with
“ Three ‐ way call, please say dial or call ” .
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
b g
to link all
the callers together.
Ending a Call
To end a call:
1. Press
b g
. The system responds with “ Ready ”
followed by a tone.
2. Say “ End Call ” . The call is then ended.
Muting a Call
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
4-120
Ofrecido por www.electromanuales.com