Cadillac 2010 Escalade Two-mode Hybrid, Руководство пользователя

Страница: 81 / 110

Black plate (33,1)
Cadillac Escalade Two-mode Hybrid - 2010
If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place and stopping. Then
do this:
1. Turn on the hazard warning flashers. See “ Hazard
Warning Flashers ” in the Index of the owner
manual.
2. Park the vehicle. Set the parking brake firmly and
put the shift lever in P (Park).
3. Turn off the engine.
4. Inspect the flat tire.
If the tire has been separated from the wheel, has
damaged sidewalls, or has a puncture larger than a
¼ inch (6 mm), the tire is too severely damaged for the
tire sealant and compressor kit to be effective. See
“ Roadside Service ” in the Index of the owner manual.
If the tire has a puncture less than a ¼ inch (6 mm) in
the tread area of the tire, see
Tire Sealant and
Compressor Kit (Without Selector Switch) on
page 6
‑ 33 or Tire Sealant and Compressor Kit
(With Selector Switch) on page 6 ‑ 43 .
Tire Sealant and Compressor Kit
(Without Selector Switch)
System Identification
If the vehicle has the tire sealant and compressor kit
shown above, see the operating instructions that follow.
6-33