ASSEMBLY AND OPERATING INSTRUCTIONS
HARDWARE LIST
A1 and A2 : A1 Hex Nylon Lock Nut qty 4 - A2 qty 1
B: Lock Washer qty-4
C1 and C2: C1 Hex Bolt qty 4 - C2 qty 1
D: Cotterless Pin qty 4
E: Top Belt qty-1
(H)
Receiver Bar
qty-1
. Make sure all hardware connections are secure before each use.
. Never exceed receiver hitch manufacturer’s tongue weight rating.
. Do NOT allow exhaust fumes to blow on loaded cargo – It’s a fire
hazard.
. Never exceed maximum static BASE LOAD capacity of 450 Lbs.
(evenly distributed).
. Do NOT transport flammable items such as gas, propane, etc.
. Carpod is not intended for transporting humans or live stock.
. Never exceed maximum SIDEWALL pressure load of 150 Lbs. (evenly
distributed).
. Never load cargo on top of the sidewalls in folded position.
. Bouncing or rapid stopping of the vehicle will increase the load
weight and may reduce rated capacity substantially.
. Accessory tail light kit must be used if Cargo Carrier covers vehicle
taillights.
. When erecting/opening sidewalls DO NOT release them to free-fall.
. CARPOD Inc. will NOT be responsible for any damage if warnings
have not been heeded.
Patent No.: US 8,061,571
1
4
F: Hairpin Cotter qty-1
G: Assembly Pin qty-1
Item# M2205
H: Sleeve qty-1
