2-3
Power Windows
The controls are located on the door armrests. Tap the
controls downward or upward to lower or raise the
windows in small amounts. To express
-
open the
window, press the forward edge of the control down
for about one second and then release. If you want to
stop the window as it is lowering, pull up the front of
the control.
To raise the window, pull up the front of the control.
Pulling the control up for about one second and then
releasing it will express
-
close the window.
When you stop your vehicle and turn the ignition key to
LOCK, you can still use the power windows. The
electrical power to operate the windows will not shut off
until a door is opened
--
there is no time limit to this
feature. As soon as a door is opened, power window
movement will stop immediately.
Programming the Power Windows
If the battery on your vehicle has been recharged,
disconnected or is not working, you will need to
reprogram each power window for the express
-
open and
close features to work. Before reprogramming, you will
need to replace or recharge your vehicle’s battery.
To program each window, follow these steps:
1. Close all doors.
2. Press and hold the power window control until the
window has fully opened.
3. Pull the power window control up until the window
is fully closed.
4. Continue holding the control up for approximately
five seconds after the window is completely up.
The window is now programmed. Repeat the process for
each window.
Содержание 2001 Catera
Страница 1: ......
Страница 27: ...1 15 Put someone on it Get it up to speed Then stop the vehicle The rider doesn t stop...
Страница 135: ...2 68 The Instrument Panel Your Information System...
Страница 283: ...6 32 2 Remove the black rubber cap that protects the bulb area 3 Remove the plug connector from the bulb...