2-63
Programming the Sunroof
If the battery on your vehicle has been recharged,
disconnected or is not working, you will need to
reprogram the sunroof following these steps. Refer to
the illustration under “Sunroof” for knob positions.
With your vehicle’s ignition on:
1. If the sunroof is closed, turn the knob to
position “E.” Hold the knob in position for
about five seconds.
If the sunroof is open, turn the knob to E and
hold until the glass panel has closed. Now
continue holding the knob for approximately
five more seconds.
2. Turn the knob to position “G” and hold until the
sunroof is fully tilted (about three seconds after the
motor has stopped).
3. Now turn the knob to position E and keep holding
until the sunroof is fully closed (about three seconds
after the motor has stopped).
4. Turn the knob to position“A” and hold until the
sunroof is fully open (about three seconds after the
motor has stopped).
5. Turn the knob to position E and keep holding
the knob until the sunroof has fully closed
(about three seconds after the motor has stopped).
The sunroof is now programmed.
If the sunroof keeps opening after you attempt to close
it once it has been programmed, you will need to repeat
Steps 2 through 5 (up to three times if needed).
If you are still having problems, consult your dealer
for service.
Also keep in mind that if something is in the way of the
sunroof closing during programming and you continue
to program the sunroof, the sunroof will only open or
close to the spot where the obstruction occurred. You
will need to reprogram the sunroof again, making sure
that the object has been removed.
Содержание 2001 Catera
Страница 1: ......
Страница 27: ...1 15 Put someone on it Get it up to speed Then stop the vehicle The rider doesn t stop...
Страница 135: ...2 68 The Instrument Panel Your Information System...
Страница 283: ...6 32 2 Remove the black rubber cap that protects the bulb area 3 Remove the plug connector from the bulb...