cadetheat.com Tel: 855.CADET.US PO Box 1675 Vancouver, WA 98668-1675
Benefits You Can Depend On
SAVE THESE INSTRUCTIONS
UCT Built-In Thermostat Kit
Installation Instructions
IMPORTANT
TOOLS
REQUIRED:
• Phillips
Screwdriver
• (3) or (4)
Insulated Wire
Connectors
• Optional built-in temperature control for your
Cadet Perfectoe model UC undercabinet
heater
• Easy to use adjustable dial
• Available with white or black knobs to match
your heater grill
• Use with 120 or 240 volt Cadet Perfectoe
model UC undercabinet heaters
• Available in single (2 wires) or double (4
wires) pole
• 22 amp maximum rating
• Your UCT built-in thermostat is guaranteed
with a
limited 1 year warranty
1. Read all instructions before installing or using
this thermostat.
2. High temperatures may be generated under
certain abnormal conditions. Do not partially or
fully cover or obstruct the front of the heater.
3. Do not operate any heater after it malfunctions.
Disconnect power at service panel and have
heater inspected by a qualified electrician before
reusing.
4. To disconnect heater, turn controls to off or
low, and turn off power to heater circuit at main
disconnect panel.
5. Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the
heater.
6. To prevent a possible fire, do not block air
intakes or exhaust in any manner.
7. A heater has hot and arcing or sparking parts
inside. Do not use it in areas where gasoline,
paint, or flammable vapors or liquids are used or
stored.
8. Do not use outdoors.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
Single Pole Thermostat Models:
UCT1W, UCT1B
http://www.cadetheat.com/products/wall-heaters/perfectoe
Double Pole Thermostat Models:
UCT2W, UCT2B
Single pole or double pole thermostats may be
used with both 120 or 240 volt service.
Information is also available on our website:
Page 1
