Cadence Flash F200-2, Руководство пользователя

Страница: 8 / 32

OEM RADIO INTEGRATION WITH AUTOSTART
8
This newest series of Flash amplifiers features our newest
circuitry innovation. Say for example you are trying to
integrate the Cadence Flash amplifier in to a system with an
OEM radio which does not have RCA output jacks or a remote
turn on wire for the amplifier, until now you would have had to
configure a complicated relay system to turn on the amplifier
and use en external high-low converter to send the signal
in to the amplifier.
But now all you need to do is to wire your speakers to
the included High Level Input harness and plug the
harness in to the amplifier. When you turn on your OEM
head unit, the amplifier will receive the music signal and
automatically turn on the amplifier. When you turn off the
head unit, the amplifier will automatically turn off after a
60 second built-in delay.
Do not use RCA and High Level Input at the same time.
Do not keep the speakers hooked up to the High Level Input
once you are using them as the amplifiers signal input.
The ideal ground point for the High Level Input harness is
the radio ground, if thats not possible to reach any good
chassis ground point will do.
GND
GROUND POINT
REAR SPEAKER
OUTPUT
REMOTE HOOK-UP OPTIONAL
WHEN USING HIGH LEVEL INPUT
R L