Cadence Flash F200-2, Руководство пользователя

Страница: 19 / 32

FIVE CHANNEL INPUT MODE
19
INPUT MODE
SWITCH SET TO 2CH
2 CHANNEL MODE
4 CHANNEL MODE
5 CHANNEL MODE
INPUT MODE
SWITCH SET TO 4CH
INPUT MODE
SWITCH SET TO 5CH
If your head unit has one single pair of RCA
outputs, input them in to the amplifiers Channel
1 and 2 input jacks and set the Input Mode Switch
to 2Ch. The amplifiers preamp circuitry will
automatically mix all the channels and output will
occur on all 5 channels. There will be Left and Right
balance with constant subwoofer but no Front to
Read Fader Control.
If your head unit has two pairs of RCA outputs,
input Front Left and Front Right in to amplifier
Channels 1 and 2 input jacks. Rear Left and Rear
Right in to amplifiers Channels 3 and 4 input jacks.
Set the Input Mode Switch to 4Ch. The amplifiers
preamp circuitry will automatically mix all the
channels and output will occur on all 5 channels.
There will be Left and Right balance, Front to Rear
Fader with constant subwoofer.
If your head unit has three pairs of RCA outputs,
input Front Left and Front Right in to amplifier
Channels 1 and 2 input jacks. Rear Left and Rear
Right in to amplifiers Channels 3 and 4 input jacks.
Subwoofer output in to Channel 5. If your head
unit has only a single subwoofer output, use a Y
adaptor to feed both Channel 5 inputs. Set the
Input Mode Switch to 5Ch. The amplifiers preamp
circuitry will automatically mix all the channels
and output will occur on all 5 channels. There will
be Left and Right balance, Front to Rear Fader with
independent subwoofer.