background image

29

GRACE3 - SPIRIT3 - MADISON - TABLA - ROXY - ATRIUM - SOLO 5

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The fire extinguish 

and the stove stops

Empty hopper

Full the hopper.

Auger blocked by a 

foreign object (for 

example nails)

Clean the auger.

Bad quality pellets Try other types of pellets.

Pellet drop value 

too low "phase 1" Adjust the pellet loading.

Check if on the 

display there is an 

"ACTIVE ALARM"

Have the stove checked.

Flames are weak 

and orange colou-

red, pellets do not 

burn properly and 

the glass blackens

Not sufficient 

combustion air

Check as following: probable obstructions of the combusti-

ble air inlet from the back or from the bottom of the stove; 

burning pot obstructed holes with too ash remains. Have the 

fan blades and auger cleaned. 

Obstructed exhaust

The exhaust chimney is partially or totally obsturcted. Contact 

an expert stove-repairer who checks the stove from the 

exhaust up to the chimney pot. Provide immediately for stove 

cleaning. 

Obstructed stove

Provide immediately at the inner cleaning of the stove.

The fume fan is out 

of order

The pellets can burn also thanks to chimney flue depression 

without the aid of the fume fan. Have the fume fan imme-

diately replaced. It can be noxious to health to let the stove 

running without fume fan.

The exchanger 

fan continues to 

turn even though 

the stove has just 

cooled

Faulty fume tem-

perature probe

Replace the fume probe.

Faulty mother 

board

Replace the mother board.

Ash remains along 

the stove

Faulty or out of 

order door gaskets Replace the gaskets.

Not sealed fume 

pipes

Contact an expert stove-repairer who will immediately pro-

vide for sealing the junctions with high-temperature silicone 

and/or for replacing pipes with those in compliance to current 

regulations. A not sealed fume channelisation can be noxious 

to health.

Содержание GRACE3





































Отзывы: