Cadel ATRIUM Скачать руководство пользователя

Страница: 5 / 36

GRACE3 - SPIRIT3 - MADISON - TABLA - ROXY - ATRIUM - SOLO 5

• The chimney flue must be sealed from fumes.

• It must have a vertical run without narrowing. It must be realized with fume and condensation resistant materials with ther-

mal insulation and able to last against usual mechanical stresses.

It must be insulated to avoid condensation and to reduce fume cooling effects.

• The stove must be spaced out from fuels or flammable materials with an air gap or with insulating materials. Check the distan-

ce with the chimney manufacturer.

• The chimney entrance must be placed in the same room where the appliance is installed or otherwise in the adjacent room and

it must be provided with a solid and condensation collection chamber under the entrance, accessible through the sealed metal

gate.

• Auxiliary exhaust fans cannot be installed neither along the chimney nor on the chimney pot.

• The inner section of the chimney flue can be round (the best one) or square and the jointed sides must have a minimum radius of 20 mm.

• The section dimension must be:

•

minimun Ø100 mm

•

recommended max Ø180 mm

• Made the efficiency of the chimney flue overhauled by an expert stove-repairer and if necessary cover the chimney flue with

materials in compliance with current regulations.

• The flue system must be placed on the roof.

• The chimney flue must be provided CE in accordance with EN 1443 regulation. Please find attached an example of label:

Fig. 3 - Example of label

3.4

HEIGHT-DEPRESSION

The depression (draught) of a chimney flue depends also on its height. Check the depression with the values provided at

FEATU-

RES a pag. 31

. Minimum height 3,5 meters.

3.5

MAINTENANCE

• The fumes extraction pipes (fumes c chimney flue + chimney pot) must always be cleaned, scrubbed and checked

by an expert stove-repairer, in compliance with current regulations, with the instructions of the stove-manufacturer and the

directives of your insurance company.

• In case of doubts, please follow the most restrictive regulations.

• Have your chimney flue and chimney pot checked and cleaned by an expert chimney sweep at least once a week. The chimney

sweep has to release a written declaration about the security of the system.

• Not cleaning compromise safety.

Содержание ATRIUM





































Результаты поиска

Содержание ATRIUM

Отзывы:

Похожие инструкции для ATRIUM

Бренды по названию

Популярные бренды

Cadel ATRIUM, Руководство по установке

Результаты поиска

Содержание ATRIUM

Отзывы:

Похожие инструкции для ATRIUM

Бренды по названию

Популярные бренды