Cadel ATRIUM Скачать руководство пользователя

Страница: 23 / 36

GRACE3 - SPIRIT3 - MADISON - TABLA - ROXY - ATRIUM - SOLO 5

5.11 ELECTRIC CONNECTION

Warning: the appliance must be installed by an authorized technician!

• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension

specific of every model, as described in the technical datas table (see

FEATURES a pag. 31

• The plug must be easily accessible when the appliance is installed.

• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not

efficient, please endow you with one in compliance with the law.

• Connect the supply cable first on the back of the stove (see

Fig. 60

Fig. 61

) and then at a wall electric socket.

Fig. 60 - Electric socket with master switch

Fig. 61 - Plug connected

• Do not use extension cables.

• If the feeder cable is damaged, it must be replaced by an authorized technician.

• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.

5.12 CONNECTION TO THE EXTERNAL THERMOSTAT (ATRIUM - ROXY - MADISON - TABLA - SOLO 5)

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the menu key for a few seconds (1).

• Repeatedly press the P2 key until

M8 - Technical settings

M8-SEt tEcHnic

" appears.

• Select by pressing the P3 key.

• Set the password with keys P1 or P2 (keeping the key pressed accelerates the setting).

• Confirm by pressing the P3 key.

• Press the P1 or P2 keys until

M8 - 2 General settings

M8-2 SEt GEnErAL

" appears.

• Confirm with P3.

• Scroll with the P3 key up to:

Pr46 Enable Remote

Pr46 rEMoto EnAbLEd

• Press the P1 or P2 key to modify the status.

• Confirm with the P3 key.

• Scroll to

MB Output

Mb EScAPE

" with key P1 or P2.

• Confirm with P3 key.

•

• Press P1 (temperature setting) and set

t-e

“

t-e

” value. The external thermostat is now enabled.

5.13 CONNECTION TO THE EXTERNAL THERMOSTAT (SPIRIT

- GRACE

)

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the "

menu

" button.

• Scroll with the arrows to "

Settings

• Select by pressing "

menu

• Scroll with the arrows again to "

Ext.Thermostat

• Select by pressing "

menu

Содержание ATRIUM





































Результаты поиска

Содержание ATRIUM

Отзывы:

Похожие инструкции для ATRIUM

Бренды по названию

Популярные бренды

Cadel ATRIUM, Руководство по установке

Результаты поиска

Содержание ATRIUM

Отзывы:

Похожие инструкции для ATRIUM

Бренды по названию

Популярные бренды