Page 5
509 Sharptown Road P.O. Box 345 Bridgeport, NJ 08014
Email: [email protected] Fax: 856-467-5511
Internet: http://caddycorp.com Phone: 856-467-4222
System Overview - Model 21-C Conveyor
This instruction manual is specifically designed to aid in the installation and maintenance of the 21-C Caddy
Conveyor system.
Simplicity of design, in this Conveyor model, eliminates the need for much of what would be described as routine
maintenance procedures. There are no drive shafts, sprockets or conventional bearings to adjust or lubricate.
Simple care and cleaning, with a mild detergent, is all that is necessary to insure proper operation.
The 21-C is made of two separate DURA-SAN belts, driven directly from the same gearbox. The belt runs through a
series of pulleys that smoothly guide the belt while holding it firmly in place. The pulleys have sealed stainless steel
bearings that require little lubrication. The belt is circular in profile. The circular shape fits well into the grooved
pulleys and provides a tight fit with no slippage, when properly adjusted. The belt is fused using an overlapping belt
splicing tool, making it one continuous belt.
The DURA-SAN belt has outstanding tensile strength, flex-life and resistance to wear. The DURA-SAN belt, as well
as other items made with base plastic or poly material, can be subject to attack by chemical agents. Cleaning agents
containing ammonia, chlorine, bleach, quating agents or other harsh chemicals must be
avoided.
Use of these products can cause belt damage and will void the warranty.
Caddy Corporation recommends
cleaning the 21-C Conveyor with the following:
Ivory liquid
(1% solution).
Tide detergent
(1% solution).
Any comparably mild detergent.
Then rinse with copious amounts of water.
