32
AFTER-SALES ASSISTANCE
In case of any malfunctions, disconnect the appliance from its power and
water supply. Consult the solutions proposed in the table.
If the solution is not listed in the
table, contact CADCO Customer
Service. Provide the following
information:
- the date of purchase;
- the appliance data on the serial
plate;
- any alarm messages that are
shown on the display of the oven
connected to the prover.
Cadco, Ltd.
200 International way
Winsted, CT 06790
Tel. (860) 738-2500
Fax (860) 738-9772
Email: [email protected]
Website: www.cadco-ltd.com
Malfunction
Possible cause
Solution
The proofer fails to
heat when a
leavening
cycle is
activated.
The proofer is not connected to the
power supply.
Connect to the power
supply.
The P.C.B. is damaged.
Contact the
Customer Assistance
Service
The proofer resistor is damaged.
The proofer temperature sensor is
damaged.
The proofer was not connected to the
oven vis RJ45 cable during installation.
The RJ45 cable that connects the oven to
the
proofer is disconnected or damaged.
When the
proofer starts a
leavening cycle, it
does not produce
humidity
The proofer is not connected to the water supply.
Connect the proofer
to the water supply.
The water intake solenoid is damaged.
Contact the Customer
Assistance Service
The P.C.B. is damaged.
The proofer humidity probe is damaged.
INT:
Made by: UNOX S.p.A. Via Majorana 22, 35010 Cadoneghe - Padova (ITALY)
3902067143
3902067143
MOD.
1
S/N
06-2017BakerLux
TM
GROSS WEIGHT: 62 kg NET WEIGHT: 50 kg
XAKPT-08FS-C
Pe: 6,3 kW 220-
240V 1N˜220
-
240V 3˜/380
-
415V 3N˜50/60 Hz 150
-600 kPa IP X3
Содержание BAKERLUX SHOP.Pro XAKPT-08FS-C
Страница 20: ...20...