Cadco BAKERLUX SHOP.Pro XAKHT-HCFS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 40

11
EN
BAKERLUX SHOP.Pro™ Hoods
Pre-installation
INSTALLATION CODES AND
STANDARDS
Installations within the United
States, must follow:
- 1.State and local codes.
- 2.National Electrical Code (ANSI/
NFPA No.70, latest edition) avai-
lable from the National Fire Pro-
tection Association, Batterymarch
Park, Quincy, MA 02269.
- 3.Vapor Removal from Cooking
Equipment, (NFPA-96, latest edi-
tion) available from NFPA.
Installations within Canada, must
follow:
- 1. Local codes.
- 2.Canadian Electrical Code (CSA
C22.2 No.3, latest edition) availa-
ble from the Canadian Standards
Association, 5060 Spectrum Way,
Mississauga, Ontario, Canada L4W
5N6.
DELIVERY AND INSPECTION
Cadco
strives to ensure the
appliance is received in good
working condition. To prevent
shipping damage, the appliance is
shipped from the factory and must
only be transported using pallets
supplied by
Cadco
. Each unit has
been carefully inspected before it was
packaged and consigned to a shipper/
installer.
Upon delivery:
Inspect the shipping container,
carefully noting any exterior
damage on the delivery receipt,
which must also be signed by the
driver or delivery person.
- Unpack and check for any dam-
age, which was not evident on the
outside of the shipping container.
- Check for concealed damage. The
carrier must be notified immedi-
ately of damage not readily visible
upon the delivery of the unit. The
crate and all packaging materials
must be retained for inspection.
Cadco
does not assume liability for
loss or damage of the appliance
during shipping and/or delivery. The
carrier assumes full responsibility
for delivery in good condition when
the shipment was accepted. If
the
product was lost or
damaged in shipment
Cadco
will
provide assistance in filing a
claim with the carrier.