5
5
7. Troubleshooting
• A normal flame is blue and may have a yellow tip. If the flame is completely yellow, it may be that the jet is not securely fitted. Re-
tighten the jet to give a gas tight seal. An overfilled gas cylinder can also cause large yellow flames. Cylinder should be returned to
filling station and checked by weight.
• Check that the inlet to the burner pipe is clear and free of obstructions.
• If the flame power drops or the gas will not light, check that the gas cylinder still contains gas (shake to hear the noise made by the
liquefied gas). If there is still gas, the jet might have become blocked or partially blocked.
• If you suspect a blocked jet, follow the instructions above.
• Check for spider webs or insect nests in the gas tube or primary air inlet.
GB
8. Cleaning
• It is recommended to clean your appliance after every use. This will prolong the life of your appliance.
• The Potstand is removed by lifting it from the stove top and can be washed in a detergent solution.
• To clean the stove body, simply wipe with a damp cloth using a little detergent, if necessary.
• DO NOT IMMERSE IN WATER as this will allow water to get into the burner tube causing the appliance to malfunction.
• Do not use abrasive cleaners or scourers as this will cause permanent damage to the surface.
• To avoid ignition failure, keep the burners clean.
• Use a brush to clean the burners.
• A tooth brush may be used to clean out the venturi should there be any obstacles within the venturi.
9. Storage
• Handle the appliance with care. Do not drop it.
• After use, wait until the appliance has cooled down, disconnect it from the gas cylinder and store them in a cool dry place. Store your
cylinder in a well-ventilated place.
• It helps to place the appliance in a plastic bag when not in use as this will prevent the ingress of dirt and insects, which may affect
the gas flow.
•
Warning:
An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
• LPG cylinders should preferrably be stored outdoors if not in use.
10. Spares
• Always use genuine CADAC spares as they have been designed to give optimum performance.
