Cactus RF60X, Руководство пользователя

Страница: 32 / 64

32
11.1.2 Multi Flash in Master and Slave
Modes
An RF60X in Master mode will cause
a Slave RF60X that uses the same RF
channel to synchronize to Multi mode
settings.
1. To enter Multi mode on the RF60X
Master, press until you see
<MASTER> displayed as the group
name.
2. Press the button once.
The LCD of the RF60X Master and
Slave units will show
and
. Both Master and Slave units
are now in Multi Flash mode.
3. On the RF60X Master, follow the
steps in 11.1.1 to adjust the
number of flashes and flash
frequency per second (Hz). The
flash frequency will apply to both
Master and Slave units in all
active groups.
4. To exit Multi mode, press
twice to return to the
main screen.
Notes:
1. When the number of flashes is
larger than that supported by
the power level of a particular
slave group, it will be reduced
accordingly for that particular
slave
(see table Maximum Number
of Multi Flashes on page 29-30).