
10
manual
wall. If the structure of your wall is different, corresponding installation material must be
used. In any case, consult a specialist.
• Make sure to observe the correct thread size during installation of the display screen to
the wall bracket.
5 Montage:
Installation:
Wall Installation:
Please use the wall bracket as template (A) to mark 6
holes to be drilled in the wall using a level. Check, if gas or water pipes, or power lines
are behind the wall before drilling. Use a 10 mm stone drill to bore the holes with a depth
of 60 mm. Insert one dowel (F) into each of the drilled holes. In doing so, a hammer can
be useful. Now, use the wall screws (E) and suitable washers (D) to attach the wall
bracket (A).
Attaching Screen Holders to the Rear Side of the Display Screen:
make sure the screen
holders are parallel to
each other and centered
to the display screen.
(Fig. 2-A) M4, M5, M6,
and m8 screws are
supplied for attachment
to the display screen. Other sizes must be purchased from a specialty shop. You must
use the supplied spacers for display screens with curved rear side as illustrated in (Fig.
2-B). For display screens with flat rear side, proceed as illustrated in (Fig. 2-C). Here, the
proper screw size depends on the thread size of the display screen.
Hooking Up:
Now, hook the display screen onto the wall bracket as illustrated in
(Fig. 3-A).
Step 1
Step 2
Step 3
nOTe:
The installation is completed. For disassembly the steps must be carried out in
reverse order.
Содержание CAB WH EASYFIX L 51932
Страница 50: ...50 Οδηγίες Χρήσης ...
Страница 51: ...51 TM ...