Cabrinha Switchblade 2018, Руководство пользователя

Страница: 16 / 30

12
2018 KITE USER MANUAL
SPRINT™ INFLATION SYSTEM
The SPRINT™ infl ation system is a simple to use feature to quickly infl ate your kite to an even
pressure. The SPRINT™ system uses a single infl ation point to connect your high volume, two way
Cabrinha pump. As you pump your kite with air, all struts and your leading edge infl ate quickly and
simultaneously to the desired pressure. The supplied leash pump and threaded valve connection
keeps your kite under control even when pumping up directly in the wind.
Once the kite is pumped you can choose to clip off the air to the struts. This way if you damage a
strut while in use, the rest of the kite will maintain its pressure. At the end of the session you can
choose to defl ate your kite completely by disengaging the strut clips.
You can also keep your struts infl ated and put your kite away rolled up so that the next session
will take just minutes to set up.
FIG 3
FIG 2
FIG 1
AIRLOCK™ INFLATION/DEFLATION VALVE
SETUP
THE UPPER SECTION IS
THE INFLATION CAP
THE LOWER SECTION IS THE
RELEASE VALVE
SINGLE INFLATION VALVE FILLS THE ENTIRE KITE WITH AIR