Cabletron Systems WPIM T1 Скачать руководство пользователя | Manualshive

Страница: 3 / 66

background image

WPIM-T1/DDS User’s Guide

i

NOTICE

Cabletron Systems reserves the right to make changes in specifications and other information
contained in this document without prior notice. The reader should in all cases consult Cabletron
Systems to determine whether any such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL,
INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT
NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR
THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN
ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH
DAMAGES.



1998 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005

All Rights Reserved
Printed in the United States of America

Order Number: 9032750 December 1998

Cabletron Systems

,

SecureFast

,

QuickSET

,

and

LANVIEW

are registered trademarks, and

CyberSWITCH

is a trademark of Cabletron Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of
their respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment uses, generates, and can radiate radio frequency energy and if not installed in
accordance with the operator’s manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference in which case the user
will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

Only qualified personnel should perform installation
procedures.

«
1
2
3
4
5
...
»

Содержание WPIM T1



































































Отзывы:

Нет отзывов

Похожие инструкции для WPIM T1

Бренд: TC Electronic Страницы: 2

Бренд: Accelerated Страницы: 10

Бренд: Accelerated Страницы: 4

Бренд: Paradox Страницы: 4

Бренд: TFortis Страницы: 86

AT-9424Ts/XP AC

Бренд: Allied Telesis Страницы: 3

LoadMaster 1500

Бренд: KEMP Technologies Страницы: 71

Бренд: bintec elmeg Страницы: 33

BladeCenter Management Module

Бренд: IBM Страницы: 184

Бренд: u-blox Страницы: 29

Бренд: Barco Страницы: 30

Optane Persistent Memory 200 Series

Бренд: Supermicro Страницы: 54

Бренд: PADAUK Страницы: 27

iMarc SLV 9820-2M

Бренд: Paradyne Страницы: 24

Бренд: Zhone Страницы: 53

Network Scanning Unit A

Бренд: Ricoh Страницы: 206

Бренд: H3C Страницы: 34

Бренд: H3C Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды