Chapter 2:
Local Management
2-4
WPIM-DI Local Management Guide
NI/DI Timeslot View
Displays the status of the Timeslot Configuration table. This field toggles
between Active and New. The Active setting displays current Timeslot
Configuration table settings. The New setting allows you to change
Timeslot Configuration table settings. The default setting is
Active
. The
default setting for the Timeslot Configuration table is all Timeslots not
assigned (
000
).
NI/DI Line Coding
Displays the line coding for the physical T-1 line. This field toggles
between B8ZS and AMI. The default setting is
B8ZS
.
NI/DI Frame Type
Displays the T-1 Frame type. This field toggles between ESF and D4. The
default setting is
ESF
.
NI/DI Tx Clock Source
Displays the T-1 Transmit Clock Source. This field toggles between Loop
Timing (Extracted Line Data) and Local Timing (Internal Clock). The
default setting is
Loop Timing
. If the DI Enabled field is set to
diDataEnable, Local Timing cannot be selected as a choice.
NI/DI Line Buildout
Displays the line coding for the physical T-1 line. Set this field to 0 dB
unless the service provider recommends another setting. The default
setting is
0 dB
. This field steps between the following levels:
•
0 db
•
-7.5 db
•
-15 db
•
-22.5 db
NOTE
The service provider (i.e., AT&T, Sprint, MCI, NYNEX, etc.)
determines the settings for the following fields. Consult the
service provider for the correct settings.
Содержание WPIM-DI
