Cabletron Systems TRMM Скачать руководство пользователя | Manualshive

Страница: 3 / 70

background image

NOTICE

ii

CABLETRON SOFTWARE PROGRAM LICENSE

LICENSE.

You have the right to use only the one (1) copy of the Program

provided in this package subject to the terms and conditions of this License
Agreement.

You may not copy, reproduce or transmit any part of the Program except as
permitted by the Copyright Act of the United States or as authorized in writing
by Cabletron.

OTHER RESTRICTIONS.

You may not reverse engineer, decompile, or

disassemble the Program.

APPLICABLE LAW.

This License Agreement shall be interpreted and

governed under the laws and in the state and federal courts of New Hampshire.
You accept the personal jurisdiction and venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF

LIABILITY

1. EXCLUSION OF WARRANTY.

Except as may be specifically

provided by Cabletron in writing, Cabletron makes no warranty, expressed or
implied, concerning the Program (including Its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE
SUPPLIED TO YOU BY CABLETRON IN WRITING, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABLITY AND FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE
ACCOMPANYING WRITTEN MATERIALS, AND ANY
ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES.

IN NO

EVENT SHALL CABLETRON OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF BUSINESS, PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION,
SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR RELIANCE
DAMAGES, OR OTHER LOSS) ARISING OUT OF THE USE OR
INABILITY TO USE THIS CABLETRON PRODUCT, EVEN IF
CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, OR ON THE DURATION OR

«
1
2
3
4
5
...
»

Содержание TRMM







































































Отзывы:

Нет отзывов

Похожие инструкции для TRMM

AirGENIO SUPERIOR

Бренд: 2VV Страницы: 27

Бренд: Häfele Страницы: 2

Бренд: Häfele Страницы: 24

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Water Specialist Страницы: 60

Бренд: Yoshitake Страницы: 4

Бренд: YOKOGAWA Страницы: 20

UTAdvanced UT32A

Бренд: YOKOGAWA Страницы: 3

PDS CONTROL Series

Бренд: S&P Страницы: 32

Apollo 70-600 Series

Бренд: Conbraco Industries Страницы: 4

Бренд: Ravel Страницы: 33

DIGI-STAR GT400

Бренд: AGRI TRONIX Страницы: 26

DAQP-CHARGE-B Series

Бренд: Dewetron Страницы: 14

PHAZR-5 UR5U-9000

Бренд: Universal Remote Control Страницы: 2

Бренд: Universal Remote Control Страницы: 5

by-me Eikon 20521

Бренд: Vimar Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды