Cabletron Systems TRMM, Руководство пользователя

Страница: 10 / 70

INTRODUCTION
1-3
The TRMM resides in the management (first) slot of the MMAC chassis.
It is designed to manage a full chassis of token ring interface modules.
The TRMMIM also provides the same management functions as the
TRMM to an additional ring from any mid-chassis slot. Both modules can
be used with other Cabletron modules to support a range of Token Ring
and mixed Token Ring and Ethernet configurations in the same MMAC
hub.
Each module has an externally accessible EIA, RS232 COM 2/Console
port which supports LM access via Telnet, a Digital Equipment
Corporation VT200™ or VT300™ series terminal (or emulating
terminal), and a modem-to-terminal configuration. Each module’s
COM 1 port (on older modules, the port labeled Modem) also supports
Uninterruptible Power Supply device monitoring via Cabletron remote
management applications (i.e., LANVIEW, SPECTRUM).
Local Management provides the tools to manage the TRMM/TRMMIM
and all of their attached segments. You can change factory defaults,
configure ring networks via the FNB backplane, enable/disable ports, and
view network statistics. Other features of Local Management allow you to:
• Assign an IP address and a subnet mask.
• Provide network security by controlling access to the ring. You can
prevent unauthorized stations from inserting into the ring.
• Control password access to the TRMM/TRMMIM.
• Designate which Network Management Stations receive trap alarms
from the device.
• View the MIB components supported by your TRMM/TRMMIM.
• Navigate through the TRMM/TRMMIM’s Management Information
Bases (MIB) and manage the objects within it from a remote location,
given the appropriate security level.
• Assign an IP address to a router with Proxy-ARP disabled used for
firmware downloads.