INSTALLATION REQUIREMENTS AND SPECIFICATIONS
2-9
operational data to the management module from where it can then be
monitored via remote management applications.
2.2.2 Front Panel LEDs and the RESET Switch
LANVIEW LEDs
Front panel LANVIEW LEDs are shown in Figure 2-5 and described in
Chapter 4.
RESET switch
The RESET switch (Figure 2-5) is accessible through a hole in the front
panel near the top of the module. It reboots the module when activated.
Refer to Chapter 4, Testing and Troubleshooting, for a description of
how to activate the RESET switch and the subsequent booting process.
Figure 2-5. LANVIEW LEDs and RESET Switch
2.2.3 General Specifications
This equipment is designed in accordance with UL478, UL910, NEC
725-2(b), CSA, IEC, TUV, VDE Class A, and meets FCC part 15, Class A
limits.
BOK
TRMMIM
SN
RESET
F
N
B
ERR
16 Mb
NSRT
LWRP
LANVIEW LEDs
RESET SWITCH
TRMMBook2 Page 9 Tuesday, March 5, 1996 1:13 PM
