INTRODUCTION
Page 1-2
1.3
TRFOT-3 FEATURES
LANVIEW LEDs
Cabletron Systems’ LANVIEW Status Monitoring and Diagnostics
System is a convenient troubleshooting tool that helps you diagnose
physical layer problems. The front panel LANVIEW LEDs alert you to
power failures, cable faults, and link problems.
Connectivity
The TRFOT-3 is equipped with single mode ST connectors for fiber
links and a DB9 connector for copper links. The TRFOT-3 supports
cable distances of up to 10 km over single mode fiber optic cable. You
can attach the TRFOT-3 at either end of a fiber link.
Ring Speed Compatibility
The TRFOT-3 supports both 4 and 16 mb/sec ring speeds and senses
the ring speed automatically.
1.4
RECOMMENDED READING
We recommend the following publications for more information on
implementing a token ring network.
Local Area Networks, Token Ring Access Method, IEEE
Standard 802.5
LAN Troubleshooting Handbook
, Mark Miller (1989, M&T
Publishing, Inc.)
1.5
GETTING HELP
If you need additional support related to the Cabletron Systems
TRFOT-3, or if you have any questions, comments, or suggestions
concerning this manual, feel free to contact Cabletron Systems
Technical Support:
By phone ......................... (603) 332-9400
Monday-Friday; 8am - 8pm EST
By CompuServe
®
............ GO CTRON from any ! prompt
By Internet mail ............. [email protected]
