Cabletron Systems SmartSwitch Router, Руководство пользователя

Страница: 64 / 338

Chapter 3: Bridging Configuration Guide
64 SmartSwitch Router User Reference Manual
• Define the Maximum Idle Interval
Adjusting the Interval between Hello Times
You can specify the interval between hello time.
To adjust this interval, enter the following command in Configure mode:
Defining the Forward Delay Interval
The forward delay interval is the amount of time spent listening for topology change
information after an interface has been activated for bridging and before forwarding
actually begins.
To change the default interval setting, enter the following command in Configure mode:
Defining the Maximum Age
If a bridge does not hear BPDUs from the root bridge within a specified interval, it
assumes that the network has changed and recomputes the spanning-tree topology.
To change the default interval setting, enter the following command in Configure mode:
Specify the interval between hello
time for default spanning tree.
stp set bridging hello-time
<num>
Specify the interval between hello
time for a particular instance of
spanning tree.
pvst set bridging spanning-tree
<string>
hello-time
<num>
Set the default of the forward delay
interval for default spanning tree.
stp set bridging forward-delay
<num>
Set the default of the forward delay
interval for a particular instance of
spanning tree.
pvst set bridging spanning-tree
<string>
forward-delay
<num>
Change the amount of time a bridge will
wait to hear BPDUs from the root bridge
for default spanning tree.
stp set bridging max-age
<num>
Change the amount of time a bridge will
wait to hear BPDUs from the root bridge
for a particular instance of spanning tree.
pvst set bridging spanning-tree
<string>
max-age
<num>