Cabletron Systems SmartSwitch Router, Руководство пользователя, Страница: 46 / 338

Chapter 1: SSR Product Overview
46 SmartSwitch Router User Reference Manual
Connecting Between the SSR and Other Systems
To test a connection between the SSR and an IP host, enter the following command in User
or Enable mode:
To open a Telnet session from the SSR to an IP host, enter the following command in User
or Enable mode:
The SSR accepts up to four Telnet sessions. You can immediately end a particular Telnet
session (for example, an unauthorized user is logged in to the SSR).
To end a user’s Telnet session, first determine the session ID by entering the following
command in Enable mode:
To end the Telnet session, enter the following command in Enable mode:
Configuring Logging
During operation, the SSR system software sends messages to the management console.
These messages include informational, warning, error, and fatal messages. Console
messages can also be sent to a Syslog server.
To configure a Syslog server, enter the following command in Configure mode:
If a Syslog server is identified and ACL logging is enabled, then messages about whether
packets are forwarded or dropped because of ACL are sent to the Syslog server.
Chapter
18 , “Security Configuration Guide” on page 271 describes ACL logging.
Test connection
between the SSR
and an IP host.
ping
<hostname-or-IPaddr> packets <num> size <num> wait
<num> [flood] [dontroute]
Telnet to a specified
IP host.
telnet
<hostname-or-IPaddr> [socket <socket-number> ]
Show current
Telnet sessions.
system show users
Kill the Telnet
session. system kill telnet-session <
session-id
>
Configure a Syslog server. system set syslog [ server < hostname-or-
IPaddr >][ level < level-type >][ facility < facility-
type >][ source < source-IPaddr >][ buffer-size < size >]