2-134 SmartSwitch ATM Switch Reference Manual
LESELAN
Descriptions
[Distribute]
Establishes nature of control distribute VCC.
Possibie values are: All or Proxy. All
establishes control distribute VCC to all
clients. Proxy establishes control distribute
VCC only to Proxy clients.
All, Proxy
Proxy
[BUSATMAddress]
ATM address of the BUS (specify if the LES
and BUS are not co-located).
13-20 byte hex-based/
Up to 59 characters
Output Parameter
Description
[ATM Address]
ATM address of the LES on the ELAN.
[Distribute VPI/VCI]
VPI/VCI values of the control direct VCC or multicast send VCC.
[Distribute Method]
Indicates whether the control distribute VCC is established for all clients or for proxy
clients only.
[ELAN Type]
Same as the [ELANType] input parameter.
Operator
Parameters/Permissions
Description
add leselan
[ELANNumber] <elannumber>
[ELANName] <elanname>
[ConnectMethod]
<connectmethod>
[ELANType] <elantype>
[Multipoint]
<distributevcctype>
[MTU] <maxframesize>
[Distribute]
<controldistributevccoption>
[BUSATMAddress]
<busatmaddress>
Administrator
Creates a specified ELAN on the LES. Each ELAN must have
both an LES and a BUS assigned to it.
delete
leselan
[ELANNumber] <elannumber>
Administrator
Removes a specified ELAN from the LES and drops all the
clients connected to it.
Input Parameter
Description
Value/Field Size
Default
Содержание SmartSwitch 2500
Страница 28: ...1 14 SmartSwitch ATM Switch Reference Manual List of Operators and Switch Attributes Introduction...
Страница 376: ...3 8 SmartSwitch ATM Switch Reference Manual swms Command Boot Load Commands...
Страница 388: ...A 12 SmartSwitch ATM Switch Reference Manual Acronyms...
Страница 392: ...B 4 SmartSwitch ATM Switch Reference Manual Event Alarm Messages...