SPECIFICATIONS
Receptacle
IEC Socket
Size
12
.
99
x
5.12
x
2.48
in. (
33
x
13
x
6.3
cm)
Weight
7.39
lb. (
3.35
kg)
Temperature
Operating: 32° to 131°F (0° to 55°C)
Storage: -40° to 185°F (-40° to +85°C)
Relative Humidity
20% to 90%
Cooling
1 fan on rear
AC Input Power
100 - 240V ~ 5A, 50/60Hz
DC Output Power
+ 3.3 VDC @ 30 A max.,
+ 5 VDC @ 9 A max.,
+ 12 VDC @ 0.7 A max.
DC Power Cable Connector
22-pin
Overload Protection
Reduces output to safe levels when output exceeds 120%
MTBF
50,000 hours minimum
Regulatory Compliances
Safety
UL 1950, CSA C22.2 No. 950, 73/23/EEC, EN 60950,
IEC 950
Electromagnetic Compatibility (EMC)
FCC Part 15, CSA C108.8, 89/336/EEC, EN 55022,
EN 61000-3-2, EN 61000-3-3, EN 50082-1,
AS/NZS 3548, VCCI V-3
Warranty
Three
year
s
SmartSTAC
K
REDUNDANT POWER
ELS-S1DC
QU
IC
K IN
STALLA
TIO
N G
UID
E
9033267-01
E1299-R01
150210-102
NOTICE
Cabletron Systems reserves the right to make changes in specifications and other
information contained in this document without prior notice. The reader should in
all cases consult Cabletron Systems to determine whether any such changes have
been made.
The hardware, firmware, or software described in this manual is subject to change
without notice.
IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY
INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS)
ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMA-
TION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN
ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF
SUCH DAMAGES.
1999
by Cabletron Systems, Inc., P
.O. Box 5005, Rochester, NH 03866-5005
All Rights Reserved
Printed in Taiwan, R.O.C.
Order Number: 9033267
-01
May
2002
Cabletron, Cabletron Systems, and
SmartSTACK are trademarks or registered
trademarks of Cabletron Systems, Inc.
All other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment uses,
generates, and can radiate radio frequency energy and if not installed in accordance
with the operator’s manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause interfer-
ence in which case the user will be required to correct the interference at his own
expense.
WARNING:
Changes or modifications made to this device which are not
expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
INDUSTRY CANADA NOTICE
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA
NORME NMB-003 DU CANADA.
VCCI NOTICE
EC CONFORMANCE DECLARATION
European contact:
Cabletron Systems Limited
Nexus House, Newbury Business Park
London Road, Newbury
Berkshire RG13 2PZ, England
This information technology product complies with ISO/IEC Guide 22 and
EN45014. It conforms to the following specifications:
EN55022(1988)/CISPR-22(1985) Class B
EN50082-1: IEC 1000-4-2, 3, 4, 6
This information technology product complies with the requirements
of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/
336/EEC and carries the CE Mark accordingly.
Only qualified personnel should perform installation
procedures.
