– 3 –
4. All Port Status lights remain on.
5. All Link LEDs flash, four at a time, in sequence, from left to
right.
6. After several more seconds, the CPU LED will stay on,
indicating that the power-up diagnostics sequence is complete.
7. The Port Link LEDs will turn on for those ports with good links.
8. The Segment Status LEDs will turn on (or flash) when the
selected status condition is present.
Note:
If a critical component fails diagnostics, the CPU LED will
turn off and the ELS10-26 will attempt to reboot. If the CPU LED
does not stay on, contact Cabletron Systems Global Call Center.
ELS10-26TX
STATUS
PORT STATUS MODE
10BASE-T/
100BASE-TX
FEPIM
2X 4X 6X 8X 10X 12X
14X 16X 18X 20X 22X 24X
MONX
26X
27
LINK
ST
A
TUS
LINK
ST
A
TUS
26
27
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
13
14
15
16
23
24
21
22
17
18
19
20
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS
3
4
1
2
7
8
5
6
11
12
9
10
TX
ACT
FDX MON
RX COL
100 USR
PWR
CPU
RESET
25
MON
COM
CPU
LED
Segment Status LEDs
Port Status LED
Port Link LED
