CHAPTER 6: LOCAL MANAGEMENT
6-22
SEHI USER’S GUIDE
Cycling Through OIDs
To cycle through an OID:
1. Use the arrow keys to Highlight CYCLES, then press Return.
2. Enter the number of cycles desired to occur after “ENTER CYCLE
COUNT:”, then press the Return key.
3. Enter how many seconds delay desired between get next requests after
“ENTER CYCLE DELAY (secs):”, then press the Return key.
Exiting the SNMP Tools Screen
To exit the SNMP Tools Screen:
1. Use the arrow keys to highlight the RETURN command.
2. Press the Return key. The Feature Selection screen appears.
6.3.5 The Device Statistics Screen
This section describes the features of the Device Statistics screen. The
user can view error, collision, and traffic statistics for the stack, a selected
module, or a selected port. The user can also enable and disable ports.
To access the Statistics screen from the Features Selection screen, use the
arrow keys to highlight the Device Statistics option, then press the
Return key. The Device Statistics screen shown in Figure 6-8 appears.
