Cabletron Systems MCC-DFL, Быстрая справка

Страница: 5 / 10

QR-5
QR.1.3 Description Of Switches
Switch 1
You can set the type of fiber keying on RI/RO ports to connect to devices
using 802.5J fiber keying or devices using Cabletron fiber keying.
Switch 1 dictates the type of fiber keying; the setting depends on whether
the attached device is using Cabletron fiber keying or 802.5J fiber keying.
Set the switch as shown in the table.
Switch 2
This switch works in conjunction with Switch 4 to select the mode of
operation for the RJ45 port. Use Switch 4 to dictate whether the FOT will
act as a RI/RO device or station/lobe device. Once this has been done
Switch 2 determines the application of the RJ45 port. The fiber ST port
automatically configures to work with the RJ45 port. For example,
configuring the RJ45 port as a RI, automatically changes the fiber ST port
to a RO. Set Switch 2 as shown in the table.
NOTE
Cabletron Systems offers complete compatibility with vendor
products that comply with the “new” 802.5J standard for fiber
RI/RO ports. Therefore, the MCC-DFL offers connectivity to
products using 802.5J or Cabletron Systems fiber keying.
Keying Type for Fiber RI/RO ST Port * Set Switch 1 to Position
Connection to Cabletron compliant devices On
Connection to 802.5J compliant devices Off
*Applicable to RI/RO applications only – 802.5J fiber keying is always
used for station and lobe applications.
Mode of Operation for RJ-45 Port Set Switch 2 to Position
RO or lobe applications On
RI or station applications Off