FDMMIM/LM MESSAGES
A-1
APPENDIX A
FDMMIM/LM MESSAGES
This appendix lists each warning and error message that can occur in
FDMMIM/LM, describes potential causes for each message, and
suggests corrective actions where appropriate. Within each category,
messages are listed alphabetically.
INFORMATION MESSAGES
Information messages require no user action. They simply verify that
a user initiated action is complete. Information messages are self
explanatory and do not require detailed descriptions.
WARNING MESSAGES
Warning messages tell you that the action you requested did not
complete successfully or that a condition exists that you may want to
know about. Usually, the condition requires no response.
A-A connection accepted
Cause:
Connecting an FDDI A port to another A port is
undesirable. The FDMMIM supports A-A connections
unless your Connection Policy specifies otherwise.
Action:
If possible, reconnect the FDMMIM’s A port cable to a B
port. The FDMMIM supports an A-A connection.
A-A connection rejected
Cause:
Connecting an FDDI A port to another A port is
undesirable. The FDMMIM rejects A-A connections when
directed to do so by your Connection Policy.
Action:
Reconnect the FDMMIM’s A port cable so that it connects
to a B port.
