INSTALLING THE ADAPTERS
Page 2 - 7
•
Power up the computer. The computer should recognize the
F70XX adapter at this time; the heartbeat pulse of one flash per
second should be visible (for a period of thirty seconds) on the
Processor LED. (See Section 2.5, LANVIEW LEDs, which
follows.)
2.5
LANVIEW LEDS
The FDDI network adapters incorporate Cabletron Systems’ built-
in LANVIEW
®
visual diagnostic and status monitoring LEDs. The
LANVIEW LEDs (shown in Figure 2-4) are more effective than a
network monitor, because network troubleshooting personnel can
quickly scan the LEDs to diagnose network problems and
determine which network segment is faulty.
Figure 2-4. LANVIEW LEDs
Processor
(red)
Receive Data
(yellow)
Transmit Data
(green)
No Connection - (red)
Signal Detect - off
Link - (green)
Bicolor LED
