CHAPTER 2:
INSTALLATION
2-2
EMC37-12 USER’S GUIDE
2.2.1
Rack Mounting the EMC37-12
Before installing the EMC37-12, care must be taken to ensure that the
rack used will support the unit and that the rack remains stable with the
EMC37-12 installed. In order to allow for proper cooling within the rack,
there must be a two inch clearance on either side of the unit. Refer to
Chapter 1
for power and environmental requirements.
The following procedures explain how to install the EMC37-12 in a
19-inch rack.
1. Remove four cover screws (two from each side) located along the
front edges of each side of the EMC37-12. Figure 2-1 shows the
location of the screws.
2. Using the four replacement cover screws provided in the accessory kit,
attach the rack mounting brackets to each side of the EMC37-12.
Figure 2-1. Installing the Rack Mount Brackets
Do not remove the cover from the EMC37-12.
Screws (4)
Rack Mounting
Brackets (2)
TPLINK
XMT
RCV
POK
12 11 10 9 8 7 6 5 4 3 2 1
EMC37-12
ETHERNET MEDIA CONVERTER
WITH
LANVIEW
PWR
12
10
9
8
7
6
5
4
3
2
1
11
TERM
