Cabletron Systems DLEHF-MA, Руководство пользователя

Страница: 183 / 194

Setting the Mode Switch
DLEHF-MA User’s Guide C-3
• Switch 6 (continued)– After changing the position of switch 6 and
restarting the module, the DLEHF-MA requests a new image
download until it either receives a new image or the RESET button on
the front panel is pressed. When the RESET button is pressed, the
DLEHF-MA continues trying to contact a BootP server, but will time
out in approximately one minute. If the module times out, the image is
downloaded from its FLASH memory.
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on either the next power up or the next operation of the front
panel RESET switch. ALL user entered parameters, such as IP
addresses, subnet masks, SNMP traps, and bridging functions are
restored to their factory default settings.
• Switch 8 – Reset Password/Community Strings. Changing the position
of this switch clears only the user-entered passwords stored in
NVRAM, and restores the default passwords. Once the DLEHF-MA
is reset, the passwords can either be reentered or the default passwords
(Public and ENTER) may be used.
Do not change the position of switch 8 unless it is necessary to
reset the module super-user configured passwords to their
factory default settings.