Cabletron Systems DLEHF-MA, Руководство пользователя

Страница: 100 / 194

Chapter 5: Local Management
5-38 DLEHF-MA User’s Guide
5.15 GENERAL CONFIGURATION SCREEN
The General Configuration screen, Figure 5-17, allows the user to set the
system date and time, IP address and subnet mask, the default gateway,
the TFTP gateway IP address, the operational mode, the management
mode, and the COM port configuration. The General Configuration
screen also allows the user to clear NVRAM and enable or disable IP
fragmentation.
To access the General Configuration screen from the Module Configuration
Menu screen, use the arrow keys to highlight the GENERAL
CONFIGURATION menu item and press ENTER. The General
Configuration screen, Figure 5-17, displays.
Figure 5-17 General Configuration Screen
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the physical address of the module.
IP Address (Modifiable)
This display allows the IP address to be set for the DLEHF-MA. To set
the IP address, refer to Section 5.15.1.
MS 700 LOCAL MANAGEMENT
Firmware Revision: XX.XX.XX
General Configuration
236223
BOOTPROM Revision: XX.XX.XX
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Module Date:
Module Time:
Screen Refresh Time:
Screen Lockout Time:
Com 1: [ENABLED] Application: [LM]
Clear NVRAM [NO]
Module Uptime XX D XX H XX M
Module Type: DLEHF-MA
Slot Number: X
IP Fragmentation [ENABLED]
Operational Mode: [802.1D SWITCHING] Management Mode: [DISTRIBUTED]
00-00-ID-00-00-00
000.000.000.000
255.255.0.0
NONE DEFINED
0.0.0.0
Event Message Line
RETURN SAVE
07/11/1997
14:23:00
30 sec.
15 min.
EXIT