Workgroup Remote Access Switch 29
C
ONNECTIVITY
Connecting a Workgroup Product to a CSX100 via PPP
d. Optional: Define Caller ID Numbers if Caller ID Security was enabled. Click Next.
e.
Configure a default route to Central. Click Default Route.
f.
Enable Network Address Translation. Click Advanced, and then Yes. Enable Network
Address Translation by clicking in the box. Click Next.
4.
Click Save.
IPX R
OUTER
TO
IPX R
OUTER
C
ONFIGURATION
If your network protocol is IPX and you want the central site to be able to call the remote site, than
you should route between the central site and the CSX100. If you have a server on the CSX100 side
you will also need to route.
C
ONFIGURATION
FOR
S
ITE
“C
ENTRAL
”
The configuration on Central to allow IPX Routing to Remote using PPP is as follows:
1.
Perform
initial configuration
steps.
2.
Under Options, select IPX Routing, then:
a.
Enable IPX Routing.
b.
Under IPX Internal Network Number enter the following value: 123456.
c.
Under IPX Interfaces add a LAN Interface and a hexadecimal IPX Network Number
(0000BABE).
3.
Under Security, select System Options and Information, then under System Information:
a.
Set your System Name (Central). This matches up with Central device information
configured on Remote.
b.
Set your System Secret (Central_S). This matches up with Central device information
configured on Remote.
4.
Under Security, select Device Level Databases, select On-node Device Entries, then add a device
where the Device Name (Remote) must match the system name on Remote. When you add the
device you must then enter the following information:
a.
Under ISDN Information select ISDN Line Protocol, then select PPP.
b.
Optional: If you wish to dial out to Remote, under ISDN Information you must enter a dial
out number (13135552222) and a base data rate (64Kb).
ISDN
Network #0000BABE
Network # 0000FACE
FILESER1
Node # 0409A0111111
IN # 432109*
CSX1200
Phone # 13135551111
IN # 123456*
CSX100
Phone # 13135552222
* IN # = Internal Network Number
"Central"
"Remote"
C A B L E T R O N S Y S T E M S
POWER
SERVICE
TX
RX
10BASE - T
LAN B-CHANNELS E1 ONLY
B2 B4
B6 B8
B26 B28
B22 B24
B18 B20
B14 B16
B10 B12
B30 L1
B1 B3
B5 B7
B25 B27
B21 B23
B17 B19
B13 B15
B9 B11
B29 B31
E1
D
T1
D
