Workgroup Remote Access Switch 27
C
ONNECTIVITY
Connecting a Workgroup Product to a CSX100 via PPP
c.
Under AppleTalk Port Information, configure a WAN UnNumbered port:
•
Select the WAN UnNumbered port type.
d. Under AppleTalk Static Routes, configure a static route to Central:
•
Enter Extended for Central’s network type (the default).
•
Enter 10-13 as the destination network range (Central’s network range).
•
Enter 0.0 as the next hop (it’s over an unnumbered link).
•
Enter Central as the next hop’s device name.
•
Enter 2 as the number of hops for this route.
•
Enter Engineering as Central’s default zone name.
•
Enter Marketing as Central’s second zone name.
4.
Under Security, select System Options and Information, then under System Information:
a.
Set your System Name (Remote). This matches up with Remote device information
configured on Central.
b.
Set your System Secret (Remote_S). This matches up with Remote device information
configured on Central.
C
ONNECTING
A
W
ORKGROUP
P
RODUCT
TO
A
CSX100
VIA
PPP
In this section, we describe the configuration steps required for connecting a workgroup product
to a CSX100 via PPP. Separate instructions are included for two router-to-router applications,
IP
and
IPX
, and two router-to-bridge applications,
IPX
and
AppleTalk
.
The documentation assumes that you are able to run QuickSET and have it find your CSX100. If
you are unable to run QuickSET, please refer to the Read Me First document on the CyberSWITCH
100 Family with QuickSET CD-ROM.
IP R
OUTER
TO
IP R
OUTER
WITH
N
ETWORK
A
DDRESS
T
RANSLATION
C
ONFIGURATION
With Network Address Translation (NAT), the CSX100 has one real IP address on the WAN and
you can create your own IP addresses on the LAN. Using DHCP, you can create any range of
addresses for the PC’s on the LAN to use. When a PC requests to access the WAN, the CSX100
sends its own valid WAN IP address instead of the address on the PC. The outside world is
unaware of the IP addresses used on the LAN. NAT reduces the number of IP addresses needed
for a remote network by using only one address, instead of needing one address for the router, and
one address for each PC on the remote network.
"Central"
LAN IP Address 199.2.2.1
Phone 13135551111
"Remote"
LAN IP Address 192.168.254.1
Phone 13135552222
ISDN
CSX1200
CSX100
199.2.2.2
192.168.254.2
192.168.254.3
WAN IP Address 199.2.2.3
DHCP Range
192.168.254.2
192.168.254.20
C A B L E T R O N S Y S T E M S
POWER
SERVICE
TX
RX
10BASE - T
LAN B-CHANNELS E1 ONLY
B2 B4
B6 B8
B26 B28
B22 B24
B18 B20
B14 B16
B10 B12
B30 L1
B1 B3
B5 B7
B25 B27
B21 B23
B17 B19
B13 B15
B9 B11
B29 B31
E1
D
T1
D
