background image

Module Specific Configuration Menu Screen

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

5-69

5.20

MODULE SPECIFIC CONFIGURATION MENU 
SCREEN

The Module Specific Configuration Menu screen, 

Figure 5-26

, allows the 

user to select one of five screens to configure ports or check system 
resources specific to the 6E12X-26 and 6E13X-25.

Access the Module Specific Configuration Menu screen from the Module 
Configuration Menu screen by using the arrow keys to highlight the 
MODULE SPECIFIC CONFIGURATION MENU menu item and 
pressing ENTER. The Module Specific Configuration Menu screen 
displays.

NOTE

The following menu items on the Module Specific Configuration 
Menu screen may not display if the operational mode of the 
module has been set to SECURE FAST VLAN or 802.1Q 
SWITCHING:

PORT REDIRECT FUNCTION

BROADCAST SUPPRESSION

Refer to your Release Notes to see if the functionality provided 
by the above screens is supported.

Section 5.15.9

 provides instructions on setting the operational 

mode.

Содержание 6E122-26

























































































































































































Отзывы: