Cabletron Systems 3F00-01, Руководство пользователя

Страница: 40 / 70

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
Page 4-6 FDDI Dual-Attached Intelligent Module User’s Guide
• The MAC address of the port [
ifPhysAddress
]
• The size (in bytes) of the largest network datagram which may be sent/
received on the port. This does not include the MAC header, LLC
header, and FCS. For the 3F00-01/3F55-01, the size is 4352. [
ifMtu
]
• The port’s estimated MAC-level bandwidth, in bits per second. The
bandwidth for the 3F00-01 is 100,000,000. [
ifSpeed
]
• The maximum length ever obtained by the port’s outbound packet
queue (in packets). [
ifOutQLen
]
• The number of packets received by the port may be obtained by adding
the number of unicast packets received by the port and the number of
non-unicast packets received by the port.
[
ifInUcifInNUcastPkts
]
• The total number of bytes received on the port, counting the MAC
header and FCS, but not counting the bytes in packets that were
rejected due to hardware errors. All counters are 32 bit wide
wrap-around counters which can only be reset by rebooting the ATX.
[
ifInOctets
]
• The number of packets transmitted by the port may be obtained by
adding the number of unicast packets transmitted by the port and the
number of non-unicast packets transmitted by the port.
[
ifOutUcifOutNUcastPkts
]
• The total number of bytes transmitted on the port, counting the MAC
header and FCS, but not counting the bytes in packets that were
rejected due to hardware errors. [
ifOutOctets
]
4.2.2.2 Port Receive Statistics
• Number of characters in the forwarded received packets,
[
sifRxChars0
]
• Number of characters in the filtered received packets, [
sifRxChars1
]