Cabletron Systems 3F00-01, Руководство пользователя

Страница: 19 / 70

Chapter 2: Connecting to the Network
FDDI Dual-Attached Intelligent Module User’s Guide Page 2-3
2.1.2 Dual-homed Single-attached Station
Dual-homing is a method of connecting concentrators and stations that
permits an alternate or backup path to the dual ring in case the primary
connection fails.
The connection is normally made via dual-attached concentrators (DACs)
which are connected to both the primary and secondary FDDI rings.
Other FDDI stations or concentrators are connected to the DAC master
(M) ports.
Figure 2-2 shows the ATX, with a 3F00-01 installed, connected to the
master ports of two DACs.
Figure 2-2 Dual-homed Single-attached Configuration
In this configuration, the ATX accesses the FDDI ring through port B and
DAC 2. FDDI standards for DASs such as the ATX state that if the B port
cannot be used, the device will automatically use its A port. Therefore, if
DAC 2 fails, the ATX is still connected to the ring through port A
(DAC 1).
POWER ST
ATUS
ENGINE ST
ATUS
TURBO ST
ATUS
SUPPL
Y
A
SUPPL
Y
B
1.6 Gbps
RESET
PACKET PROCESSING ENGINE
NMS PORT
POWER
FastNET ATX
TX
FDDI MIC A FDDI MIC B OPTICAL BYPASS
RING A RING B
THRU WRAP RX ACT ACT THRU WRAP POWER ST
ATUS
Port A Port B ATX
DAC 1
M M M
SAS SAS
DAC 2
M
M
M
SAS SAS
Network
1876 05