Cabletron Systems 2000, Руководство пользователя

Страница: 189 / 196

Configuring IP Priority 8-7
HSIM-W87 Configuration
Number of Entries
Displays the number of Priority IP addresses currently conÞgured. This number
will change each time you add or delete an IP address in the list box.
Below these two Þelds is a list box displaying the currently conÞgured IP Priority
Addresses. Each address is automatically assigned an
Address ID when it is
conÞgured. The lower the ID number, the higher the priority.
IP Priority Queue Status
This read-only Þeld gives you the status ( Enabled or Disabled ) of IP Priority
conÞguration. You can change the status using the Enable or Disable buttons.
To conÞgure IP Priority addresses:
1. In the IP Address field, enter the IP Address you want to configure in the
appropriate X.X.X.X format.
2. Click the Add button to add the IP Address to the list box. Remember, you can
configure a maximum of 16 IP addresses.
3. To delete an IP address, click to highlight the desired IP address in the list box
and click the Delete button.
4. To enable or disable IP Priority Address configuration, click on the Enable or
Disable button (in the IP Priority Queue Toggle section) as desired. The
current status is displayed in the IP Priority Queue Status field.