manualshive.com logo in svg

Cabletron Systems 2000, Руководство пользователя

"Handicare 2000" - надежное устройство для подъема и перемещения. На нашем сайте вы можете скачать бесплатно Руководство по быстрой справке и другие руководства для использования. Загрузите их с нашего сайта manualshive.com и ознакомьтесь с руководством по эксплуатации перед использованием продукта.

Поделиться
Скачать
background image

Repeater Statistics

5-11

Managing Ethernet MicroLAN Switches

Nothing

The Percent Load function is not currently measuring 
any statistics.

Frames (Blue)

Frames

The total number of packets (both good and error) 
processed by the selected repeater, board, or port.

Nothing

The Frames scale is not currently measuring any 
statistics.

Total Errors (Red)

Total Errors

The total number of errors of any kind processed by the 
selected repeater, board, or port.

Collisions

The total number of collisions (combined transmit and 
receive) detected by the selected repeater, board, or port.

CRC Errors

The total number of packets with CRC (

C

yclical 

R

edundancy 

C

heck) errors that the selected repeater, 

board, or port has received from the network.

Runt Packets

The number of runt packets detected by the selected 
repeater, board, or port. A runt frame is one that is less 
than the minimum Ethernet frame size of 64 bytes.

Giant Packets

The number of giant packets detected by the selected 
repeater, board, or port. A giant frame exceeds the 
maximum Ethernet frame size of 1518 bytes (excluding 
the preamble).

Algn. Errors

The number of misaligned packets detected by the 
selected repeater, board, or port. Misaligned packets are 
those which contain a non-integral number of bytes; they 
can result from a MAC layer packet formation problem, 
or from a cabling problem that is corrupting or losing 
data. Alignment errors are also known as framing errors.

OOW Collns.

The number of collisions out of the standard collision 
window (51.2 µs) experienced by the selected repeater, 
board, or port. There are two conditions which can cause 
this type of error to occur: either the networkÕs physical 
length exceeds IEEE 802.3 speciÞcations, or a node on the 
net is transmitting without Þrst listening for carrier sense 
(and beginning its illegal transmission more than 51.2 µs 
after the Þrst station began transmitting).

Nothing

The Errors scale is not currently monitoring error 
packets.

Содержание 2000





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2000

D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Бренд: D-Link Страницы: 2
Patton electronics 2888 Quick Start Manual preview
2888
Бренд: Patton electronics Страницы: 8
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Бренд: RuggedCom Страницы: 23
ZyXEL Communications P-336M Specifications preview
P-336M
Бренд: ZyXEL Communications Страницы: 2
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Бренд: National Instruments Страницы: 36
TP-Link Archer MR500 User Manual preview
Archer MR500
Бренд: TP-Link Страницы: 110
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Бренд: Zhone Страницы: 114
Aethra AS1241 Technical Specifications preview
AS1241
Бренд: Aethra Страницы: 2
Fluke Network Tester User Manual preview
Network Tester
Бренд: Fluke Страницы: 102
Quatech Device Server User Manual preview
Device Server
Бренд: Quatech Страницы: 98
Aerotech QNP3 Series Hardware Manual preview
QNP3 Series
Бренд: Aerotech Страницы: 62
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Бренд: Ubiquiti Страницы: 22
G&D ControlCenter-IP 2.0 Installation Manual preview
ControlCenter-IP 2.0
Бренд: G&D Страницы: 60
Atlantis Land I-FLY A02-WRA4-54G (Italian) Specifications preview
I-FLY A02-WRA4-54G
Бренд: Atlantis Land Страницы: 3
U-Media WST-375L User Manual preview
WST-375L
Бренд: U-Media Страницы: 42
Actelis Networks MetaLIGHT P2MP User Manual preview
MetaLIGHT P2MP
Бренд: Actelis Networks Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды