671-2001 601 Quick Start Guide_V1e.docx Page 2 of 5
Issue 1
Important Safety Instructions
1. Read and keep these instructions.
2. Follow the instructions and heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s inst
ructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
7. Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING:
THERE ARE NO USER SERVICEABLE PARTS WITHIN A RoomStar 601 UNIT.
Installation
1.
When locating the 601 unit, ensure that a clearance distance of 25mm (1”) is maintained around the unit
to provide sufficient ventilation airflow. Items that could accidentally block the ventilation grills or impede
the cooling airflow must not be located near the unit.
Ensure the unit is positioned
greater than 8” (
20cm) away from people in normal use.
Assurez-vous que l'appareil est placé à plus de 20 cm des personnes en utilisation normale.
2.
The 601 must not be installed where there is a possibility of exposure to condensation, dripping or
splashing liquids. Containers filled with fluid should not be located in the vicinity of this unit. Do not fix the
601 to any surface which is a heat source that may cause the unit to over-heat.
3.
Power off the TV/Display and connect the 601 unit to the display using the HDMI cable and the
interconnect cable that is appropriate for the type of TV being used.
•
Insert the HDMI cable into the TV’s HDMI 1 socket.
•
The interconnect cable should be connected to the TV’s RJ11 control port, and into the 601’s USB
and 2.5mm jack plug IR input socket. If required instead, the MTI interface unit should be plugged
into a USB port on the 601 unit, with a 3.5mm/2.5mm jack cable linking the adapter to the IR input
socket. A RJ11 cable should link the MTI adapter to the TV.
•
Connect the wired ethernet into the RJ45 connector on the 601 unit if it is available.
•
If a RF remote control is being used, plug the RF receiver dongle into a USB port on the 601 unit.
Note: No other USB devices should be plugged into the RoomStar unit.
4.
Power-on the 601 unit using the external mains-DC Power supply and switch the TV power back on. A
power-on LED on the 601 should be shown. Take the TV out of standby with the RoomStar Remote
control.
