www.cablematters.com
3
USB 3.1 Type-C™ M.2 SATA Dual-Bay Enclosure
3. DRIVE INSTALLATION & STORAGE CONFIGURATION
3.1 M.2 SATA Drive Installation
Important Note!
Handle drives carefully to avoid damage. Always use an anti-static wrist strap
or other grounding method. Place the enclosure tray on a clean, solid surface.
1) Check that the enclosure is turned OFF and not connected to the computer.
2) Remove the mounting screws for each M.2 drive.
3) Carefully insert each M.2 drive. The connector is keyed to fit in one direction only.
4) Gently press down on each drive until it is flush with the mounting hole for
2230, 2242, 2260 or 2280.
5) Hold down each drive and secure it with the mounting screws.
3.2 Connecting the Enclosure to the Computer
1) Connect the provided USB cable to your computer and the USB-C port on the enclosure.
2) Turn on the enclosure with the On/Off switch and check for a white power LED visible on the right front.
3) Check that the LEDs are lit for the D1 or D2 drives. Blue= Recognized / Purple = Not Recognized
4) Set a drive storage configuration mode
5) Initialize and format the SSD drives for your operating system (see pages 4-7).
